Showing posts with label 6. Show all posts
Showing posts with label 6. Show all posts
Friday, October 11, 2013
evasi0n iOS 6 x Jailbreak Untethered Errors And Fixes FAQ
.
Error 1: Cydia not loading up and cydia packages not installing
Cydia related errors in evasi0n are currently happening due to intense server overload on the cydias servers. Saurik is onto it and is busy fixing this issue. It is not caused by some technical problem in your idevice rather it is occuring simply due to millions of people are trying to access Cydia at the same point of time. See this tweet from Saurik below..
Update : Cydia Telesphoreo repo has been fixed, you can access it now if you still can’t, change your DNS to Google’s 8.8.8.8 server and try to access it again.
Error 2: Does evasi0n support OTA update
No, If you updated to iOS 6.1 via OTA (over-the-air update) it wont work on your idevice. Heres a quick solution :
Step 1: Firstly make a full backup of your device
Step 2: Update to iOS 6.1 using iTunes
Error 3: evasi0n does not work and fails everytime
It is happening because you have a passcode enabled on your idevice or you have left iTunes running during the jailbreaking process. Heres the fix..
- Disable the passcode lock on your idevice
- Dont touch your computer while evasi0n is running
Error 4: evasi0n gets stuck on “patching kernel”
If your idevice gets stuck on displaying “patching kernel” dont worry, be patient as it takes time as long as 15 minutes
. If it still doesnt progress, press Power+Home button for a long time to force a reboot. Then again jailbreak your idevice from the very beginning. See the tweet by pod2g below.Error 5 : evasi0n doesnt recognize my idevice
Although its working fine on every idevice as I have personally tested it. Make sure your idevice is supported, see the official list below.
- iPhone 3GS
- iPhone 4,4S
- iPhone 5
- iPod Touch 4th Generation
- iPod Touch 5th Generation
- iPad 2
- iPad with Retina Display 3rd and 4th Generation
- iPad Mini
As of now, any generation of the Apple TV is not supported. If it still doesnt work, restart your computer system or try to switch the USB ports, as they can cause havoc sometimes.
Error 6: evasi0n is stuck on "finding offsets"
This part of the jailbreak process takes a bit of time like around 8-10 minutes. If you still see no progress, do a Power+Home button force reboot your idevice.
Error 7: Jailbreak button appears to be grey/disabled, when the idevice is connected
This occurs because your iTunes backup is not protected by a password. You need to re-enable password protected backups again once the jailbreak process gets over.
Error 8: Weather app bug
If you have an iPad, an extra Weather app will appear after the jailbreak is completely finished. It is just hidden in a .plist extension configuration file. The evad3rs dev team member David Wang aka planetbeing is currently working on this bug fix with a Cydia patch obviously. See the below tweet from musclenerd...
Update : Fix the weather app not working error/bug by installing 2 cydia packages, details here or by re-jailbreaking with the updated version of the tool here.
Error 9: idevice freezes and gets stuck at Apple logo on booting
This problem is because of a random boot bug or it might be occuring due to an incompatible tweak. You can use any of the 3 solutions given below..
- Hold Power+Home buttons to force reboot your idevice and it should work normally with the next reboot.
- If it still doesnt work, try increasing the volume while booting
- Uninstall Activator and Sbsettings tweaks
Update : You can fix the long reboot bug through Cydia here or by jailbreaking again with the updated version of the tool, see the how-to guide here.
Error 10: idevice displaying wrong time zone and time after evasi0n jailbreak
As we are always updating this article with latest errors and bug fixes. We have been seeing a new bug that involves the wrong time zone and time after using evasi0n tool. To fix the incorrect time error toggle “Set Automatically” option to OFF. For the wrong time zone, follow this method below...
Step 1: Navigate to Settings > General > Date and Time > Set Automatically > ON
Step 2: Now you need to go back again to Settings > Privacy > Location Services (ensure it’s set to on) > System Services > Setting Time Zone. Set this option to ON.
Error 11: Cydia appears small after rebooting (quarter screen bug)?
This error or bug is known as the quarter screen bug. This bug looks like this on an iPad and iPhone (shown below).
A lot of users are reporting this quarter screen bug. The root cause of this is that you might have installed an tweak incompatible with iOS 6 running on your idevice. Follow the method given below to solve the issue.
Step 1: Firstly we need to disable all the tweaks. Reboot your idevice while holding the volume up button. .
Step 2: Launch Cydia and uninstall all iOS 6 incompatible tweaks.
If this doesnt work for you, to use Cydia again, just respring your idevice. However, this fix is not a permanent solution, it will again cause the same problem after a reboot.
Download evasi0n
evasion jailbreak Tutorials : Mac, Windows
Facing problems, ask us
If you are still experiencing troubles take a look at these tips as this will likely fix your troubles and errors.
- Disable the passcode on your iPhone, iPad or iPod touch.
- DO NOT run itunes, tinyumbrella, xcode or any other idevice tools when you are jailbreaking.
- If you ever get stuck, it’s completely safe to restart the evasi0n tool and force reboot your idevice using Power+Home button.
- If it still doesnt work, make a fresh restore of iOS 6.1 and retry again .
Saturday, October 5, 2013
iOS 6 Beta 3 For Apple TV Brings Expanded AirPlay Control
iOS 6 beta 3 of Apple TV adds the ability to streaming audio through the headphones AirPlay.
Apple has released iOS 6 Beta 3 to developers a few days ago, we mentioned to you many of the features that came to your iPhone, iPad, iPod Touch in this demo version, and now its time to talk a little bit about one of the new features that came for the Apple TV.
Running the latest software, the Apple TV will detect any AirPlay-enabled speakers on a users home network, and they will be available to select for sound output. The new feature is said to be fully operational in the latest pre-release build of iOS 6, allowing users to send audio from any content, including video, to wireless AirPlay-capable speakers.
Currently, an Apple TV running the latest publicly released version of iOS only has the ability to receive AirPlay content. The existing AirPlay settings on the Apple TV simply to turn the feature on or off, and set a password.
Apples interest in the Apple TV interface since the reform began, and feature the ability to reorder the applications available, and now adds support for streaming audio through the AirPlay
Apple has released iOS 6 Beta 3 to developers a few days ago, we mentioned to you many of the features that came to your iPhone, iPad, iPod Touch in this demo version, and now its time to talk a little bit about one of the new features that came for the Apple TV.
Running the latest software, the Apple TV will detect any AirPlay-enabled speakers on a users home network, and they will be available to select for sound output. The new feature is said to be fully operational in the latest pre-release build of iOS 6, allowing users to send audio from any content, including video, to wireless AirPlay-capable speakers.
Currently, an Apple TV running the latest publicly released version of iOS only has the ability to receive AirPlay content. The existing AirPlay settings on the Apple TV simply to turn the feature on or off, and set a password.
Apples interest in the Apple TV interface since the reform began, and feature the ability to reorder the applications available, and now adds support for streaming audio through the AirPlay
Wednesday, October 2, 2013
iTunes new update 10 6 1 7
Apple rolls out iTunes 10.6.1 update
Apple’s patch notes
iTunes 10.6.1 provides a number of improvements, including:
Fixes several issues that may cause iTunes to unexpectedly quit while playing videos, changing artwork size in Grid view, and syncing photos to devices.
- Ad******* an issue where some iTunes interface elements are incorrectly described by VoiceOver and WindowEyes.
- Fixes a problem where iTunes may become unresponsive while syncing iPod nano or iPod shuffle.
- Resolves an ordering problem while browsing TV episodes in your iTunes library on Apple TV.The update is available through OS Xs Software Updat
iTunes download page.
Sunday, September 29, 2013
Redsn0w 0 9 6 RC15 untethered jailbreak for iOS 4 3 3
Dev team has just released new version of Redsn0w 0.9.6rc15 to bring untethered jailbreak for iOS 4.3.3 on iPhone 4, iPhone 3GS, iPod touch 4G, iPod touch 3G and iPad. iOS 4.3.3 untethered jailbreak is based on i0n1cs untethered exploit.
Heres step by step guide showing you how to jailbreak iOS 4.3.3 untethered using Redsn0w 0.9.6rc15 (Win / Mac)
Step 1: Download iOS 4.3.3 for iPhone, iPad or iPod touch (download links at the end).
Step 2: Restore to iOS 4.3.3 in case you havent yet using the IPSW file you just downloaded via iTunes 10.2.2.
Step 3: Start Redsn0w and point it to the official iOS 4.3.3 firmware file.
Step 4: Now select “Install Cydia” and click “Next”. Optionally (if available), you can also select any other option you like.
Step 5: Now make sure your device is both OFF and PLUGGED IN to the computer before you click “Next”.
At this stage you will be presented with a screen where you will be guided on how to enter DFU mode. Quickly hold “Power” button and then while holding the “Power” button, you will now have to hold “Home” button too. Now after few seconds release “Power” button but keep holding “Home” button until installation begins.
Step 6: Wait until you get untethered iOS 4.3.3 jailbroken in few minutes.
Download Redsn0w 0.9.6rc15 for Windows
Download Redsn0w 0.9.6rc15 for Mac
Wednesday, September 25, 2013
evasi0n iOS 6 x Jailbreak
Compatible with all iPhone, iPod touch, iPad and iPad mini models running iOS 6.0 through 6.1
Official Mirrors
Requirements
- 5 minutes of your time!
- A computer, running Windows (XP minimum), Mac OS X (10.5 minimum) or Linux (x86 / x86_64)
- An iPhone, iPad or iPod running iOS 6.0 through 6.1 (you may check in Settings / General / About => Version)
- A USB cable to connect the device to the computer
Important! Read me!
- Backup your device using iTunes (or iCloud) before using evasi0n. If something breaks, youll always be able to recover your data.
- Please disable the lock passcode of your iOS device before using evasi0n. It can cause issues.
- Avoid all iOS and iTunes related tasks until evasi0n is complete. Why not just enjoy a brief break from the computer to stretch your legs?
- If the process gets stuck somewhere, its safe to restart the program, reboot the device (if necessary by holding down Power and Home until it shuts down), and rerun the process.
- If you get an error on OS X 10.8 saying that evasi0n cant be opened, control-click (or right-click) the app and on the revealed context menu, choose Open. On the ensuing dialogue box, choose Open as well.
Jailbreak Unlock at iOS 6 0 with both gevey ultrasn0w
Are you planning of upgrading iOS on your iPhone 3gs or 4g ?
And are you scared to loose your unlock?
Or if you have upgraded your 3gs to 6.0 and dont no now how to unlock it ?
Then, Lets get through this process.
Jailbreak iPhone 3gs/4
[Note :Notice that iPhone must be activated to unlock either with ultrasn0w or with Gevey sim.]
Unlock iPhone 3gs/4 through ultrasn0w
-Also Notice only these iPhone with these baseband could be unlocked for now with ultrasn0w.
And are you scared to loose your unlock?
Or if you have upgraded your 3gs to 6.0 and dont no now how to unlock it ?
Then, Lets get through this process.
Jailbreak iPhone 3gs/4
- Download the latest version of redsn0w .
- Download official iOS 6 IPSW for iPhone 4 (GSM) or iPhone 3GS directly from Apple.
- Launch redsn0w and go to Extras > Custom IPSW.
- Point to the IPSW you just downloaded in Step 2. If you have a 3GS, you will be prompted whether you have a 3GS with old or new bootrom. Select appropriately.
- Redsn0w will start building custom iOS 6 while removing the files that will update your baseband. Once completed, you will find this file on the same file path as the original IPSW with the prefix “NO_BB…” followed by the IPSW file name.
- Be sure to pwn DFU your iPhone with redsn0w by going to Extras > Pwned DFU. Simply follow the on-screen instructions.
- Once your iPhone is in DFU, launch iTunes and press Shift+Restore (Windows) or Option+Restore (Mac). Be careful not to select the wrong IPSW during restore!If you get error 3194, you need to edit your hosts file. See here.
- Wait for it to finish. Your iPhone will attempt to reboot and may stuck on the Apple logo with empty progress bar due to tethered jailbreak.
- Launch redsn0w again > Extras > Just Boot. Follow on screen instructions.
- Your iPhone will boot up normally and is activated .If not activated you can activate through redsn0w through jailbreak button and then again repeat tether process.
[Note :Notice that iPhone must be activated to unlock either with ultrasn0w or with Gevey sim.]
Unlock iPhone 3gs/4 through ultrasn0w
-Also Notice only these iPhone with these baseband could be unlocked for now with ultrasn0w.
- 01.59.00 (iPhone 4)
- 04.26.08 (iPhone 3GS)
- 05.11.07 (iPhone 3GS)
- 05.12.01 (iPhone 3GS)
- 05.13.04 (iPhone 3GS)
- 06.15.00 (iPhone 3GS)
- Launch Cydia through iPhone home-screen and add the following repo by going to Manage > Sources > Edit > Add:Untitled Document
- 2. Let it update sources and packages and then search for ultrasn0w fixer for iOS 6 and install it.
- 3. Finally, search for ultrasn0w (1.2.7) and install that too.(If you didnt found it then on cydia,add repo by going to manage>sources>edit>Add: ultrasn0w.com )
- 4. Reboot your device.
- You should get a signal bars now !!!
Saturday, September 7, 2013
Friday, September 6, 2013
Whited00r Updated To Replicate iOS 6 On iPhone 2G 3G and iPod Touch 1G 2G
In case you don’t know about it, whited00r is a custom firmware for old device and provides support for iPhone 2G, iPhone 3G, iPod Touch 1G and iPod Touch 2G. whited00r allows to install, jailbreak and unlock a pseudo- iOS6 on your iPhone 2G/3G and iPod Touch 1G/2G.
The new update, whited00r 6, brings the iOS6 look and feel even on the old device, which are not supported by official iOS6 firmware.
Watch the video below to better understand what whited00r 6 can give you. For more info, firmware download and an excellent installation tutorial, visit the official website…
| Backup your Data. The installation process is safe and tested, but you are doing this at your own risk. For this reason we suggest that you backup your data (our firmwares have include an iCloud-like application to backup your Game saves to dropbox since Whited00r 5), and transfer your applications from the device back to iTunes on your computer by following these simple steps: Right click on your device name in iTunes, select "Backup" and then "Transfer Purchases". You also could use other software like DiskAid to manually backup data, if you prefer. Get 20% off your Diskaid license We absolutely recommend that you make a clean installation without restoring from the backup you created with the previous instructions, but just keep it just in case you really need it to recover some data. We will not provide support if this rule is not respected. |
Download the firmware.
Download the right firmware for your device. If you have an iPhone, please read the information carefully to understand if you need the Normal or Unlocked version of Whited00r. You will find the Whited00r Software Update (.ipsw) inside the downloaded .zip. You also can verify MD5 of the .ipsw with the text file inside the compressed folder.
iPhone 2G
iPhone 3G
iPod Touch 1G
iPod Touch 2GInstallation via iTunes.
Open iTunes on the screen about your device. Click on Restore holding ALT (MacOS) or SHIFT (Windows) at the same time and select the whited00r Software Update (.ipsw) from you computer. Cant you install?
Complete the Installation.
After installation (could take up to 15 minutes, reboot the device twice) iTunes will ask you if you want to restore from a backup. Please choose “Set up a new iPhone/iPod” to improve speed and avoid strange problems. Clean installation is better and the the only way to get our support!.
Post Installation.
Your installation is complete and Whited00r is ready to use on your iPhone or iPod Touch. There are some extra, but optional, steps you would like to follow in order to get the best performances and an high customization.
Post-Install Tutorials
Subscribe to:
Posts (Atom)