Showing posts with label update. Show all posts
Showing posts with label update. Show all posts
Tuesday, October 15, 2013
iOS 5 0 1 Custom Firmware without Baseband update Tethered Jailbreak
There is a simple way to update to iOS 5.0.1 without basebande update . easy unlock and jailbreak . Its a Tethered jailbreak for all device except iPad 2 and iPhone 4s. This iOS 5.0.1 custom firmware made with Sn0wbreeze v2.8b11.There is same ready custom firmwares with 6.15.00 basebond . if you get iTunes 16XX error use iREB.1 . Custom firmware for Device :
Requirements :
NOTE: If you have original carrier sim card use unactivated and if you have not use active one.
————————————————
Download custom firmware iPhone 4 /Activated ——————-> {FileSonic | Hotfile}
Download custom firmware iPhone 4 /Unactivated —————-> {FileSonic | Hotfile}
————————————————
Download custom firmware iPhone 3Gs /Activated —————-> {FileSonic | Hotfile}
Download custom firmware iPhone 3Gs /Unactivated ————-> {FileSonic | Hotfile}
iPhone 3Gs New Bootrom – BaseBand 6.15.00 / Activated ——–> {FileSonic | Hotfile}
————————————————
iPhone 3Gs Old Bootrom [Untethered Jailbreak] /Activated —————————–> {FileSonic | Hotfile}
iPhone 3Gs Old Bootrom [Untethered Jailbreak] /Unactivated ————————–> {FileSonic | Hotfile}
iPhone 3Gs Old Bootrom [Untethered Jailbreak]-BaseBand 6.15.00/Activated –> {FileSonic | Hotfile}
Sunday, October 13, 2013
Unlock iPhone 4 on 4 10 01 3 10 01 2 10 04 1 59 00 BB Update
While we are surfing Tweets of iPhone hackers accounts we noticed some interesting news. As most of you know that MuscleNerd of iPhone Dev-team and Sherif Hashim the hacker behind ultrasn0w unlock didnt announce any updates regarding unlock iPhone 4 on basebands higher than 01.59.00 such as 2.10.04 / 3.10.01 / 04.10.01 since long time.
Pod2g the well-khnow iPhone hacker and the guy who found the untethered jailbreak exploit of Greenpois0n to jailbreak 4.1 / 4.2.1, he mentioned that MuscleNerd should write some papers about baseband exploiting so that other hackers can continue the project of unlock since MuscleNerd doesnt have the enough time to do it as hes is very busy in jailbreaking iOS devices. Check out the full conversation below :
In another Tweet, Pod2G confirming to the popular iPhone developer, chronic, that hes working on some exploit without referring the kind of those exploits.We have to wait and see, but you have to know that you can unlock your iPhone 4 on 4.10.01 / 3.101.01 / 2.10.04 on any iOS version with Gevey SIM which is a perfect solution to unlock your iPhone 4. But I hope to see new version of Ultrasn0w from Pod2g to unlock iPhone 4 for free.
Downgrade 4.10.01 to 1.59.00 Baseband iPhone 4 Possibility
How can I downgrade 4.10.01 to 1.59.00 Baseband iPhone 4 ? This question has been asked from many Limera1n.cc readers. As most of you know that 1.59.00 baseband is the last unlockable baseband on iPhone 4 with ultrasn0w.
Is Downgrade 4.10.01 to 1.59.00 Baseband iPhone 4 Possible ?
Unfortunately theres no way to downgrade 4.10.01 to 1.59.00 baseband, and iPhone Dev-team didnt even promise to work on this project. iPhone Dev-team is only work on downgrade 6.15.00 baseband for iPhone 3GS and iPhone 3G only. So dont trust anyone who claims to be able to give or sell you a product or a guide to downgrade your baseband on iPhone 4.
Downgrade 4.10.01 to 1.59.00 Baseband iPhone 4 is not possible - What Can I do ?
To unlock your iPhone 4 on baseband 4.10.01 you have to use Gevey SIM which is a perfect solution for your case. On the other hand, Pod2g, the well-know iPhone hacker is now involved in iPhone 4 unlock on higher basebands. Pod2g has received all paper from MuscleNerd related to unlock iPhone 4 project. So we expect to see a new version of ultrasn0w to unlock iPhone 4 on 4.10.01 baseband.
Friday, October 11, 2013
Redsn0w 0 9 9b4 update
Update #12: For those of you who experiment with your own custom ramdisks using the -r command-line option, version 0.9.9b4 adds auto-detection support for iOS5. This is needed because iOS4 and iOS5 treat the root partition differently (it’s encrypted in iOS5). redsn0w will now upload the correct iOS5 kernel by itself, but it’s up to your own launchd to determine if it needs to mount using the old or new partition scheme.
redsn0w now also accepts both native and img3-encapsulated versions of files you provide via the -r, -k, and -d command-line options (do redsn0w -h to show all the available options).
Here are the download links:
Tuesday, October 8, 2013
WARNING! Dont update BaseBand of NEW iphone3G s
WARNING, Starting week 127 Apple has started using a NEW BASEBAND CHIP made by TOSHIBA. If you try flashing 6.15 Ipad baseband it totally erases the chip with the unwanted side effect of erasing imei, bt, wifi. As far as is known this only effects the 8gig GS. What to look for? S/N xx127xxxxxx and above. BE WARNED.WARNING
Originally Posted by mrfixit;
up or downgrade ios or jailbreak or redsn0w is no problem, problem is bb flash to ipad bb6.15 . it will kill 3gs 135 and up confirmed and maybe as 1st post even 127 and up. and it does not matter what u do 1st, 5.01 or 4.1 or jailbreak 1st or after, once u trouble the bb with 6.15 then good bye.![]()
Monday, October 7, 2013
Update Redsn0w 0 9 8b7b Released to Jailbreak iOS 5 beta 7
Redsn0w 0.9.8b7b



Update #7b: About 12 hours after we released redsn0w 0.9.8b7 with some improvements for iOS5b6, Apple went and released iOS5b7 (what are the odds of that?!?). Even though that redsn0w could still jailbreak iOS5b7, you needed to point it at the iOS5b6 IPSW to do so. Today’s redsn0w 0.9.8b7b lets you point redsn0w directly at the iOS5b7 IPSW instead.
We’ve also added some overall improvements for old-bootrom 3GS owners (where the 24kpwn exploit applies): on those devices, you can tell redsn0w to untether 4.3.5 and lower, or iOS5b7. Old-bootrom 3GS owners can once again choose custom logos, and/or verbose booting (for the really nerdy iPhone3GS fans out there!). And it allows 4.3.4 or 4.3.5 users to use ultrasn0w again (if they have a compatible baseband).
Last but not least, we fixed some lingering Verizon iPhone4 4.2.10 JB issues.
Macintosh
Windows
Update #7b: About 12 hours after we released redsn0w 0.9.8b7 with some improvements for iOS5b6, Apple went and released iOS5b7 (what are the odds of that?!?). Even though that redsn0w could still jailbreak iOS5b7, you needed to point it at the iOS5b6 IPSW to do so. Today’s redsn0w 0.9.8b7b lets you point redsn0w directly at the iOS5b7 IPSW instead.
We’ve also added some overall improvements for old-bootrom 3GS owners (where the 24kpwn exploit applies): on those devices, you can tell redsn0w to untether 4.3.5 and lower, or iOS5b7. Old-bootrom 3GS owners can once again choose custom logos, and/or verbose booting (for the really nerdy iPhone3GS fans out there!). And it allows 4.3.4 or 4.3.5 users to use ultrasn0w again (if they have a compatible baseband).
Last but not least, we fixed some lingering Verizon iPhone4 4.2.10 JB issues.
Macintosh
Windows
Wednesday, October 2, 2013
iTunes new update 10 6 1 7
Apple rolls out iTunes 10.6.1 update
Apple’s patch notes
iTunes 10.6.1 provides a number of improvements, including:
Fixes several issues that may cause iTunes to unexpectedly quit while playing videos, changing artwork size in Grid view, and syncing photos to devices.
- Ad******* an issue where some iTunes interface elements are incorrectly described by VoiceOver and WindowEyes.
- Fixes a problem where iTunes may become unresponsive while syncing iPod nano or iPod shuffle.
- Resolves an ordering problem while browsing TV episodes in your iTunes library on Apple TV.The update is available through OS Xs Software Updat
iTunes download page.
Friday, September 13, 2013
Apple Drops iOS 4 3 4 To Fix JailbreakMe Jailbreakers And Unlockers Do Not Update
Just a quick heads-up: Apple jsut dropped iOS 4.3.4. Nothing new in this update, except for Apple patching the JailbreakMe exploit. Jailbreakers and especially unlockers stay away from this update and save your 4.3.3 blobs NOW ( using TinyUmbrella ).
Products compatible with this software update:
- iPhone 4 (GSM model)
- iPhone 3GS
- iPad 2
- iPad
- iPod touch (4th generation)
- iPod touch (3rd generation)
Friday, September 6, 2013
Update your iPhone 5 using iTunes
Ensure that youre using the latest version of iTunes.


Emergency Update ( not power On properly or other problem )
In Cause Of Hang First Try Reboot Ur Phone
For reboot U need Press " Home + Power on " For few Second it will Shut Ur Device not Power on it
If Phone Not Power On U want Update Phone User This Guide
Requirements ,
Ensure that youre using the latest version of iTunes.
computer , USB cable And Latest Firmware Download From here
instructions
Follow same Steps To Update Phone ,
In case of errors feel free to ask help here
- Connect your device to your computer using the included USB cable.
- After iTunes opens, select your device when it appears in iTunes under Devices.
- Click "Check for Update" in the Summary pane to check for available updates.
- If an update is available, iTunes prompts you to download and install the update. Do not disconnect your device until the update has finished.
Update your device wirelessly
- Make Sure your device is connected to a power source ( Charger or PC Port with USB ). To avoid potential data costs connect your device to a Wi-Fi network.
- Go to Settings > General > Software Update. iOS will automatically check for available updates.
- If an update is available* you can tap Download to download the update.
- After the download has completed tap Install to update your iOS.
- If you leave the update to download in the background, once the download has finished you will receive a notification saying an update is available for your device. Tapping Details will take you to Settings > General > Software Update. Tap Install Now to install the iOS update. If you decide to leave the installation for later Settings will display notification badge until the update has been installed.
Emergency Update ( not power On properly or other problem )
In Cause Of Hang First Try Reboot Ur Phone
For reboot U need Press " Home + Power on " For few Second it will Shut Ur Device not Power on it
If Phone Not Power On U want Update Phone User This Guide
Requirements ,
Ensure that youre using the latest version of iTunes.
computer , USB cable And Latest Firmware Download From here
instructions
- If Ur Phone Is Stuck on Boot or Hang ,Do these Steps .
- Power of It Using Press " Home + Power On " . Wait Few seconds .
- Press Only " Home Button " and Insert USB cable make Sure USB attach With Computer properly Directly with out any Hub .
- Now Phone will Power on in Recovery Mode
Follow same Steps To Update Phone ,
In case of errors feel free to ask help here
Subscribe to:
Posts (Atom)


