Showing posts with label jailbreak. Show all posts
Showing posts with label jailbreak. Show all posts
Tuesday, October 15, 2013
iOS 5 0 1 Custom Firmware without Baseband update Tethered Jailbreak
There is a simple way to update to iOS 5.0.1 without basebande update . easy unlock and jailbreak . Its a Tethered jailbreak for all device except iPad 2 and iPhone 4s. This iOS 5.0.1 custom firmware made with Sn0wbreeze v2.8b11.There is same ready custom firmwares with 6.15.00 basebond . if you get iTunes 16XX error use iREB.1 . Custom firmware for Device :
Requirements :
NOTE: If you have original carrier sim card use unactivated and if you have not use active one.
————————————————
Download custom firmware iPhone 4 /Activated ——————-> {FileSonic | Hotfile}
Download custom firmware iPhone 4 /Unactivated —————-> {FileSonic | Hotfile}
————————————————
Download custom firmware iPhone 3Gs /Activated —————-> {FileSonic | Hotfile}
Download custom firmware iPhone 3Gs /Unactivated ————-> {FileSonic | Hotfile}
iPhone 3Gs New Bootrom – BaseBand 6.15.00 / Activated ——–> {FileSonic | Hotfile}
————————————————
iPhone 3Gs Old Bootrom [Untethered Jailbreak] /Activated —————————–> {FileSonic | Hotfile}
iPhone 3Gs Old Bootrom [Untethered Jailbreak] /Unactivated ————————–> {FileSonic | Hotfile}
iPhone 3Gs Old Bootrom [Untethered Jailbreak]-BaseBand 6.15.00/Activated –> {FileSonic | Hotfile}
iPhone Dev Team Releases Untethered Jailbreak for iOS 4 3 1
Three years ago (almost to the day!), the first version of PwnageTool was released for firmware 1.1.4. So today we’re excited to release another edition of both PwnageTool and redsn0w to bring an untethered jailbreak for Apple’s latest firmware, FW 4.3.1.
WARNING WARNING — ultrasn0w users don’t update yet! See a few paragraphs down!
The 4.3.1 untether exploit comes courtesy of Stefan Esser (@i0n1c on twitter), a security researcher based in Germany. Stefan has a long history of vulnerability research, and ironically his first contribution to the iPhone jailbreak community was improved security — last year he beat Apple to the punch and implemented ASLR for jailbroken iPhones with his “antid0te” framework. We’re happy to see that Stefan then turned his iPhone attention over to an untethered jailbreak exploit!
The 4.3.1 untether works on all devices that actually support 4.3.1 except for the iPad2:
iPhone3GS
iPhone4 (GSM)
iPod touch 3G
iPod touch 4G
iPad1
AppleTV 2G (PwnageTool only for now)
The reason the untether won’t work as-is on the iPad2 is that it requires a bootrom or iBoot-level exploit to install, and the iPad2 is not susceptible to either the limera1n or SHAtter bootrom exploits.
WARNING WARNING — ultrasn0w users don’t update yet! We need to first release an update to ultrasn0w that fixes some incompatibilities when FW 4.3.1 is used on the older basebands supported by ultrasn0w. And remember once we do fix ultrasn0w for 4.3.1 (we’ll announce it here and on twitter), you must only get there via a custom IPSW from PwnageTool, Sn0wbreeze or xpwn! Don’t ever try to restore or update to a stock IPSW, or you’ll lose the unlock!
For everyone else, redsn0w is the easier program to use (and redsn0w runs on both Mac and Windows).
Read More..
WARNING WARNING — ultrasn0w users don’t update yet! See a few paragraphs down!
The 4.3.1 untether exploit comes courtesy of Stefan Esser (@i0n1c on twitter), a security researcher based in Germany. Stefan has a long history of vulnerability research, and ironically his first contribution to the iPhone jailbreak community was improved security — last year he beat Apple to the punch and implemented ASLR for jailbroken iPhones with his “antid0te” framework. We’re happy to see that Stefan then turned his iPhone attention over to an untethered jailbreak exploit!
The 4.3.1 untether works on all devices that actually support 4.3.1 except for the iPad2:
iPhone3GS
iPhone4 (GSM)
iPod touch 3G
iPod touch 4G
iPad1
AppleTV 2G (PwnageTool only for now)
The reason the untether won’t work as-is on the iPad2 is that it requires a bootrom or iBoot-level exploit to install, and the iPad2 is not susceptible to either the limera1n or SHAtter bootrom exploits.
WARNING WARNING — ultrasn0w users don’t update yet! We need to first release an update to ultrasn0w that fixes some incompatibilities when FW 4.3.1 is used on the older basebands supported by ultrasn0w. And remember once we do fix ultrasn0w for 4.3.1 (we’ll announce it here and on twitter), you must only get there via a custom IPSW from PwnageTool, Sn0wbreeze or xpwn! Don’t ever try to restore or update to a stock IPSW, or you’ll lose the unlock!
For everyone else, redsn0w is the easier program to use (and redsn0w runs on both Mac and Windows).
DOWNLOAD section:
For MAC users:
http://www.mediafire.com/?vv5jvmcpiyrr2p6
For Win users:
http://www.mediafire.com/?a891j0muajd4550
HOW TO:
NOTE: the process is identical on both Mac OSX and Windows, and also identical with previous redsn0w releases. The images used in this tutorial are from previous redsn0w tutorial, so do not be alarmed.
1. Restore your device with a stock iOS 4.2.1 firmware. ( again, by doing this you will loose the ability to unlock!!!)
2. Run redsn0w, and click on browse. Browse for the stock iOS 4.2.1 and open it
3. Wait for redsn0w to recognize it and click ‘Next’
4. On the next screen select what you want to be installed on your iOS device(s). By default, Cydia and ‘enable battery percentage’ is selected. I suggest you deselect battery percentage and everything else, and just install Cydia. This will improve ( a bit ) the overall speed of your device – if you are on a iPhone 3G. If you choose to “Enable battery percentage”, you actually toggle that off and on via Settings->General->Usage.
IF you only need to restore with a custom firmware, deselect everything, and select only “Just enter pwned DFU mode right now”
5. redsn0w will ask you to turn your device off. If it’s not already off, plug it in FIRST and then turn it off. Click next to continue
6. Now, you will need to put your device in DFU mode. Follow the instructions on the screen.
7. Wait a few seconds for redsn0w to do its thing, and you are done. You can close redsn0w because everything else it’s happening directly on the device.
NOTE: Any Windows users seeing “Waiting for reboot” for too long (more than 20 seconds or so), please try “shaking” the JB process by unplugging then replugging your USB cable (while letting redsn0w continue to run). Also, try using a USB port “closer” to your computer (as opposed to on your monitor or behind another hub).
Monday, October 14, 2013
How to Jailbreak Your iPod Touch 4G Using RedSn0w Mac 5 0b4
These are instructions on how to jailbreak your iPod touch 4G on the 5.0b4 firmware using RedSn0w for Mac. Since iOS 5.0 has not yet been released these are instructions for developers only. This procedure will not hacktivate so you must have your UDID registered with a developer, and as of now the jailbreak is tethered.
Step One
Create a folder on your desktop called Pwnage
Download RedSn0w from here and place it in the Pwnage folder. Likewise, download the latest 5.0 firmware from the iOS Dev Center and place it in the same folder.
5.0b4 (4G): iPod4,1_5.0_9A5274d_Restore.ipsw
Extract the RedSn0w zip file by double clicking it.
Step Two
Connect your iPod to the computer and launch iTunes.
Select your iPod from the list of devices on the left. Now hold down Option and click the Restore button. Restore is preferred as it wont create any wasted space on your iPod.
Navigate to the Pwnage folder on your desktop and select the 5.0 firmware ipsw. Click the Choose button to continue.
Step Three
Once iTunes has finished updating your iPod to the desired firmware open the Pwnage folder on your desktop and launch the redsn0w application from the redsn0w folder we extracted earlier.
Step Four
Once RedSn0w opens click the Browse button
Step Five
Select the 5.0 firmware ipsw we placed in the Pwnage folder on our desktop then click Open.
Step Six
Once the firmware has been verified click the Next button to continue.
Step Seven
RedSn0w will now prepare the jailbreak data
Step Eight
From this window you can select the jailbreak options you would like.
Make sure Cydia is selected and click the Next button to continue.
Step Nine
Please plug your iPod into the computer and make sure its OFF then click the Next button
Step Ten
RedSn0w will now guide you through the steps to get into DFU mode.
Hold down both the Home button and the Power button for 10 seconds.
Release the Power button and continue holding the Home button until RedSn0w detects the device.
Step Eleven
Your iPod will now reboot
Step Twelve
RedSn0w will then begin uploading the new RAM Disk and Kernel.
Step Thirteen
Once this is complete you will be notified that RedSn0w is done. Click the Finish button. When your iPod finishes rebooting (5 minutes or so) it will be jailbroken with Cydia on the SpringBoard.
BOOT TETHERED:
Since this is a tethered jailbreak you must use Redsn0w to help you boot back into your jailbroken device if its powered off for any reason. Simply connect your iPod to the computer, launch RedSn0w, select Just boot tethered right now from the options window and click Next to have RedSn0w boot your device.
*A big thanks to the iPhone Dev-Team and Geohot for their hard work and contribution to the iPhone community.
Step One
Create a folder on your desktop called Pwnage
Download RedSn0w from here and place it in the Pwnage folder. Likewise, download the latest 5.0 firmware from the iOS Dev Center and place it in the same folder.
5.0b4 (4G): iPod4,1_5.0_9A5274d_Restore.ipsw
Extract the RedSn0w zip file by double clicking it.
Step Two
Connect your iPod to the computer and launch iTunes.
Select your iPod from the list of devices on the left. Now hold down Option and click the Restore button. Restore is preferred as it wont create any wasted space on your iPod.
Navigate to the Pwnage folder on your desktop and select the 5.0 firmware ipsw. Click the Choose button to continue.
Step Three
Once iTunes has finished updating your iPod to the desired firmware open the Pwnage folder on your desktop and launch the redsn0w application from the redsn0w folder we extracted earlier.
Step Four
Once RedSn0w opens click the Browse button
Step Five
Select the 5.0 firmware ipsw we placed in the Pwnage folder on our desktop then click Open.
Step Six
Once the firmware has been verified click the Next button to continue.
Step Seven
RedSn0w will now prepare the jailbreak data
Step Eight
From this window you can select the jailbreak options you would like.
Make sure Cydia is selected and click the Next button to continue.
Step Nine
Please plug your iPod into the computer and make sure its OFF then click the Next button
Step Ten
RedSn0w will now guide you through the steps to get into DFU mode.
Hold down both the Home button and the Power button for 10 seconds.
Release the Power button and continue holding the Home button until RedSn0w detects the device.
Step Eleven
Your iPod will now reboot
Step Twelve
RedSn0w will then begin uploading the new RAM Disk and Kernel.
Step Thirteen
Once this is complete you will be notified that RedSn0w is done. Click the Finish button. When your iPod finishes rebooting (5 minutes or so) it will be jailbroken with Cydia on the SpringBoard.
BOOT TETHERED:
Since this is a tethered jailbreak you must use Redsn0w to help you boot back into your jailbroken device if its powered off for any reason. Simply connect your iPod to the computer, launch RedSn0w, select Just boot tethered right now from the options window and click Next to have RedSn0w boot your device.
*A big thanks to the iPhone Dev-Team and Geohot for their hard work and contribution to the iPhone community.
Friday, October 11, 2013
evasi0n iOS 6 x Jailbreak Untethered Errors And Fixes FAQ
.
Error 1: Cydia not loading up and cydia packages not installing
Cydia related errors in evasi0n are currently happening due to intense server overload on the cydias servers. Saurik is onto it and is busy fixing this issue. It is not caused by some technical problem in your idevice rather it is occuring simply due to millions of people are trying to access Cydia at the same point of time. See this tweet from Saurik below..
Update : Cydia Telesphoreo repo has been fixed, you can access it now if you still can’t, change your DNS to Google’s 8.8.8.8 server and try to access it again.
Error 2: Does evasi0n support OTA update
No, If you updated to iOS 6.1 via OTA (over-the-air update) it wont work on your idevice. Heres a quick solution :
Step 1: Firstly make a full backup of your device
Step 2: Update to iOS 6.1 using iTunes
Error 3: evasi0n does not work and fails everytime
It is happening because you have a passcode enabled on your idevice or you have left iTunes running during the jailbreaking process. Heres the fix..
- Disable the passcode lock on your idevice
- Dont touch your computer while evasi0n is running
Error 4: evasi0n gets stuck on “patching kernel”
If your idevice gets stuck on displaying “patching kernel” dont worry, be patient as it takes time as long as 15 minutes
. If it still doesnt progress, press Power+Home button for a long time to force a reboot. Then again jailbreak your idevice from the very beginning. See the tweet by pod2g below.Error 5 : evasi0n doesnt recognize my idevice
Although its working fine on every idevice as I have personally tested it. Make sure your idevice is supported, see the official list below.
- iPhone 3GS
- iPhone 4,4S
- iPhone 5
- iPod Touch 4th Generation
- iPod Touch 5th Generation
- iPad 2
- iPad with Retina Display 3rd and 4th Generation
- iPad Mini
As of now, any generation of the Apple TV is not supported. If it still doesnt work, restart your computer system or try to switch the USB ports, as they can cause havoc sometimes.
Error 6: evasi0n is stuck on "finding offsets"
This part of the jailbreak process takes a bit of time like around 8-10 minutes. If you still see no progress, do a Power+Home button force reboot your idevice.
Error 7: Jailbreak button appears to be grey/disabled, when the idevice is connected
This occurs because your iTunes backup is not protected by a password. You need to re-enable password protected backups again once the jailbreak process gets over.
Error 8: Weather app bug
If you have an iPad, an extra Weather app will appear after the jailbreak is completely finished. It is just hidden in a .plist extension configuration file. The evad3rs dev team member David Wang aka planetbeing is currently working on this bug fix with a Cydia patch obviously. See the below tweet from musclenerd...
Update : Fix the weather app not working error/bug by installing 2 cydia packages, details here or by re-jailbreaking with the updated version of the tool here.
Error 9: idevice freezes and gets stuck at Apple logo on booting
This problem is because of a random boot bug or it might be occuring due to an incompatible tweak. You can use any of the 3 solutions given below..
- Hold Power+Home buttons to force reboot your idevice and it should work normally with the next reboot.
- If it still doesnt work, try increasing the volume while booting
- Uninstall Activator and Sbsettings tweaks
Update : You can fix the long reboot bug through Cydia here or by jailbreaking again with the updated version of the tool, see the how-to guide here.
Error 10: idevice displaying wrong time zone and time after evasi0n jailbreak
As we are always updating this article with latest errors and bug fixes. We have been seeing a new bug that involves the wrong time zone and time after using evasi0n tool. To fix the incorrect time error toggle “Set Automatically” option to OFF. For the wrong time zone, follow this method below...
Step 1: Navigate to Settings > General > Date and Time > Set Automatically > ON
Step 2: Now you need to go back again to Settings > Privacy > Location Services (ensure it’s set to on) > System Services > Setting Time Zone. Set this option to ON.
Error 11: Cydia appears small after rebooting (quarter screen bug)?
This error or bug is known as the quarter screen bug. This bug looks like this on an iPad and iPhone (shown below).
A lot of users are reporting this quarter screen bug. The root cause of this is that you might have installed an tweak incompatible with iOS 6 running on your idevice. Follow the method given below to solve the issue.
Step 1: Firstly we need to disable all the tweaks. Reboot your idevice while holding the volume up button. .
Step 2: Launch Cydia and uninstall all iOS 6 incompatible tweaks.
If this doesnt work for you, to use Cydia again, just respring your idevice. However, this fix is not a permanent solution, it will again cause the same problem after a reboot.
Download evasi0n
evasion jailbreak Tutorials : Mac, Windows
Facing problems, ask us
If you are still experiencing troubles take a look at these tips as this will likely fix your troubles and errors.
- Disable the passcode on your iPhone, iPad or iPod touch.
- DO NOT run itunes, tinyumbrella, xcode or any other idevice tools when you are jailbreaking.
- If you ever get stuck, it’s completely safe to restart the evasi0n tool and force reboot your idevice using Power+Home button.
- If it still doesnt work, make a fresh restore of iOS 6.1 and retry again .
Thursday, October 10, 2013
How to Jailbreak iOS 5 iPhone 4 3GS iPod Touch 4G 3G iPad 1 Redsn0w Tutorial
Dev-team has released Redsn0w 0.9.8b1 to jailbreak iOS 5 beta 1, heres the full step by step guide that shows you how to jailbreak iOS 5 beta 1 on iOS devices.
iOS jailbreak - Supported Devices :
- iPod touch 3G
- iPod touch 4G
- iPad 1
- iPhone3GS
- iPhone4 (GSM)
- iPhone4 (CDMA)
Important Note : You should read dev-team restrictions and warnings Posted Here, before you intend to jailbreak your iOS device.
Required Downloads:
- Download Redsn0w 0.9.8b1 for Mac
How to jailbreak iOS 5 - iPhone 4, 3GS, iPod touch 4G, 3G and iPad 1
Step 1: Restore to iOS 5.0 beta 1Step 2: Start Redsn0w and point it to iOS 5.0 beta1 firmware ipsw file.
Step 5: Wait until you get iOS 5.0 beta 1 jailbroken in few minutes. Congratulations.
Tethered Jailbreak : Once current Redsn0w jailbreak is still tethered jailbreak, you will be required to connect your iOS device with your computer and run Redsn0w again then choose "Just boot tethered right now".
How to Jailbreak Your iPod Touch 4G Using RedSn0w Mac 4 3 5
These are instructions on how to jailbreak your iPod touch 4G on the 4.3.5 firmware using RedSn0w for Mac. If you are on 4.3.3 or lower make sure you do NOT update to iOS 4.3.5. Use the untethered JailbreakMe instead.
Step One
Create a folder on your desktop called Pwnage
Download RedSn0w from here and place it in the Pwnage folder. Likewise, download the latest 4.3.5 firmware from below and place it in the same folder.
4.3.4 (4G): iPod4,1_4.3.4_8K2_Restore.ipsw
4.3.5 (4G): iPod4,1_4.3.5_8L1_Restore.ipsw
Extract the RedSn0w zip file by double clicking it.
Step Two
Connect your iPod to the computer and launch iTunes.
Select your iPod from the list of devices on the left. Now hold down Option and click the Restore button. Restore is preferred as it wont create any wasted space on your iPod.
Navigate to the Pwnage folder on your desktop and select the 4.3.5 firmware ipsw. Click the Choose button to continue.
Step Three
Once iTunes has finished updating your iPod to the desired firmware open the Pwnage folder on your desktop and launch the redsn0w application from the redsn0w folder we extracted earlier.
Step Four
Once RedSn0w opens click the Browse button
Step Five
Select the 4.3.4 firmware ipsw we placed in the Pwnage folder on our desktop then click Open.
Step Six
Once the firmware has been verified click the Next button to continue.
Step Seven
RedSn0w will now prepare the jailbreak data
Step Eight
From this window you can select the jailbreak options you would like.
Make sure Cydia is selected and click the Next button to continue.
Step Nine
Please plug your iPod into the computer and make sure its OFF then click the Next button
Step Ten
RedSn0w will now guide you through the steps to get into DFU mode.
Hold down both the Home button and the Power button for 10 seconds.
Release the Power button and continue holding the Home button until RedSn0w detects the device.
Step Eleven
Your iPod will now reboot
Step Twelve
RedSn0w will then begin uploading the new RAM Disk and Kernel.
Step Thirteen
Once this is complete you will be notified that RedSn0w is done. Click the Finish button. When your iPod finishes rebooting (5 minutes or so) it will be jailbroken with Cydia on the SpringBoard.
BOOT TETHERED
Once RedSn0w has finished jailbreaking your device you will need to boot it tethered. Rerun RedSn0w and this time select Just boot tethered right now from the list of options instead of installing Cydia.
*As usual a big thanks to the iPhone Dev-Team and Geohot for their hard work and contribution to the iPhone community.
Subscribe to:
Posts (Atom)